Had to pull this LCC node out, and add a terminal block to feed it DC power, as this leg of the LCC network was having some power issues, causing the last node in the chain to brownout and stop responding.
Thankfully, I have a 12V DC bus already placed around the layout, so I just had to pull wire, solder some spades on, install a terminal strip, and then wire to the node. About an hour's worth of work.
Green and White 14AWG wire is the 12V DC bus; red and black 12AWG is my DCC bus. Cat5 is LCC bus, in this shot. The gray cable is Digitrax Loconet.
It's a bit tough to see, but I had to write down the colors of wire from the tortoises to the nucleo node.
No comments:
Post a Comment